logo

High Performance Concrete Protection and Professional Waterproofing

Italy ArabicUnitag Bulgaria Frenchfr-FR Portuguspt-PT German NorsknynorskNorway SvenskaSE English (UK)

Betonseal is the official representation of Innerseal and Topseal for Germany, Austria, Holland, Belgium and Luxemburg and is the leading company for Bio Gas Silo all over Europe.
www.betonseal.de


CONTROLL®TOPSEAL


IMPROVEMENT OF HEAT BALANCE OF SAND-LIME BRICK FAÇADE

The facade of a single-family house was cleaned with a high-pressure Jet device and after the complete drying once treated with Controll®Topseal. To prove that by draining with Controll®Topseal also heating and energy costs can be reduced, a thermograph examination of the facade conducted prior to treatment to the 07.03.2009 and a year later the 03.03.2010. 2009, temperatures were for example at the entrance test point T1 at 1.6 ° C, 2010 at 0.1 ° C. Point T2, 1.2 ° C was measured in 2009, in 2010, there were 0.5 º C. T3 2009 amounted to 2.0 ° C, 2010 at 1.7 ° C. Therefore, an improvement was achieved by an average of 51%.

Controll®Topseal includes water-soluble potassium Methylsilanetriolate with organic catalyst, which a deep penetrating allows up to 6 cm. As a result are back circulating prevents and frost spalling (E.g. through chill - dew - change) impossible. In addition, it increases the chemical resistance of mineral building materials.

Controll®Topseal is non-toxic and therefore not distinguishing mark according to the hazardous substances regulation. It is colourless, odourless, solvent-free, non-flammable and bio-degradable. Leave no film coating, but a transparent, clear and natural interface.

Controll®Topseal makes a strong water and dirt-resistant surface that prevents moss, fungus or algae infestation and is very easy to clean. The subsoil treated with Controll®Topseal  is still protected against efflorescence, environmental factors (air pollution) and UV rays.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

       
WARNING

Although the technical details and recommendations contained in this data sheet correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long term practical applications; for this reason, anyone who intends to use the Inner and Topseal must ensure before used that it is suitable for the envisaged application in every case.  The user alone is fully responsible for any consequences deriving from use of our products.

Komsol Innerseal products have been approved worldwide for their ability to extend the lifetime of concrete up to 3 times.