logo

High Performance Concrete Protection and Professional Waterproofing

Italy ArabicUnitag Bulgaria Frenchfr-FR Portuguspt-PT German NorsknynorskNorway SvenskaSE English (UK)

Below is a summary of how to apply Controll Innerseal.   For a more detailed explanation of how to apply Controll Innerseal, view the video below or read detailed instructions in PDF format.

 

Preparation and direction of use:

  • The surface must be free of dust, old paint or other incrustation that may obstruct penetration. Defect concrete/larger cracks must be professionally prepared in advance. Adjacent polished surfaces (e.g. glass, aluminium, tiles, and varnished surfaces) should be covered. Stir or shake the product.
  • Application: If the concrete surface is very dry or the temperature is above 20° C, moisten the surfaces slightly with water, avoiding pools and flow out.
  • Apply Controll® Innerseal with roll, brush or low-pressure sprayer (recommended).
  • Apply enough to visually confirm solid wetting of the surface, but avoid pools and flow out.
  • Cover range is 3-6 m2 at two applications, depending on the surface suction characteristics.
  • If the surface attracts abnormal amount of humidity, an additional coat may be necessary.
  • To increase and speed up the sealing process, flush with water after 12 to 24 hours.
  • To wash away possible secretion and consolidate maximum penetration, flush with water again after 48 hours.
  • Further secretion may appear later; however, this is not damaging and can be flushed away if required. Do not apply Controll® Innerseal if temperature is below 5°C or above 40°C.
  • Cleaning: Tool: Water
  • Skin: Water and regular soap
  • Make sure of good ventilation and respiratory protection in sealed areas, due to mist that may irritate airways.

The following is a video in several languages explaining in detail how to apply Controll Innerseal.

 

Video in English

 

Video in Spanish

 

Video in German

 

Video in Swedish

 

 

 

 

    

WARNING

Although the technical details and recommendations contained in this data sheet correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long term practical applications; for this reason, anyone who intends to use the Inner and Topseal must ensure before used that it is suitable for the envisaged application in every case.  The user alone is fully responsible for any consequences deriving from use of our products.

Komsol Innerseal products have been approved worldwide for their ability to extend the lifetime of concrete up to 3 times.